您好,欢迎访问这里是您的网站名称官网!
+86 774 6020736

Rosin Base Resin

Diethylene Glycol Ester of Rosin

Diethylene Glycol Ester of RosinDER-8 is a liquid tackifying resin made by esterification of gum rosin and diethylene glycol, It is a tackifier recommended to increase adhesive performances of hot melt and solvent based adhesives....
Hotline:+86 774 6020736

Product Introduction

Diethylene Glycol Ester of Rosin is a liquid tackifying resin made by esterification of gum rosin and diethylene glycol, It is a tackifier recommended to increase adhesive performances of hot melt and solvent based adhesives.

 

Specification

Appearance

         Color  
  (Gardner neat)

Acid Value     

  (mg KOH/g)

Viscosity 

 (mPa·s

Pale Yellow Transparent Sticky Liquid

≤8

≤15

150200 (100℃)


Properties

1. Increase flow property of adhesive with specific adhesion at low temperature range.

2. Soluble in aromatic solvents, aliphatic solvents, and chlorinated solvents.

3. Good compatibility with EVA and various polymers such as natural rubber, chloroprene rubber, SBR, SBS, SIS, etc

 

Typical Uses

Hot melt adhesive and pressure-sensitive adhesive, book binding, packaging, tape, labels, high-speed sealing, pressure-sensitive adhesive based on SIS or SBS.

 

Packaging:

Packing: Iron drum galvanized or with polyvinyl fluoride lining, Net each 25, 50, 200Kgs.